Set CT15-100 SLUMP TEST ASTM C 143, AASHTO T 119, BS1881-102, BS5075
Determining workability of samples of freshly concrete.
This set consist of :
CT15-110 Slump Cone 1 pc
Made of steel sheet, 4” top dia, 8” bottom dia, 12” height. Galvanized finished, with handle and foot
CT15-120 Inspection Scale 1 pc
Machined steel, complete with scale 0 – 32 cm for slump measurement, 1 cm increment.
GL96-120/04 Cement Pan 1 pc
Steel Sheet 650 x 650 x 75 mm, with handle
GL97-180/02 Scoop 1 pc
Round type large size. Aluminium casting
GL97-170/02 Mixing Trowel, pointed type 1 pc
GL97-190/04 Cement Mould Brush 1 pc
CT15-140 Tamping Rod 1 pc
Machined steel, 160 mm dia, 600 mm length, hemispherical at both sides
CT15-115 Base Plate
Made of acrylic, 650 x 650 x 20 mm.
This acrylic base plate can replace GL96-120/04.
CT15-115A Base Plate
As CT15-115,made of steel plate,size 650x650x5 mm.
CT15-111 Slump Cone
As CT15-110, but made of aluminium casting. With handle and foot.
CT15-130 Slump Hopper
Made of steel sheet, use for filling the slump cone.
CT17-100 K-SLUMP TESTER
ASTM C 1362
This apparatus is using for determining the workability and degree of compaction of fresh concrete after being plated in forms. This K-Slump Tester can be use either for in place measurement or inside the concrete specimen. The results have correlated with the slump cone test. Only 60 second test time. The K-Slump test result is directly read on the scale of the measuring rod. The calibrated hollow tube has a diameter of 20 mm.